HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 30m / 98ft
What is this Product?
View a High Definition HD Display from source over a distance of 30m, via network Cat5, Cat6 cable.Overview of:
HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 30m / 98ft
HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 30m / 98ft
HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 30m / 98ft. This single transmitter and single receiver, when connected by 2 network patch cables (cat5 or 6) will provide a high definition extension to your HDMI display and HDMI video player. As Network Cables are cheaper and easier to install over a distance, they then allow you to setup your displays a lot further away than normally possible.
You will need two network cables, and of course 2 HDMI cables, if you haven't got them already in order to make your connection too.
Will provide a 1080p HDMI signal at up to 30m when using CAT 6 Cable. See the following details for other resolutions available when using CAT 6 or CAT5e cables...:
CAT6 - 30m - 1080p
CAT6 - 40m - 1080i / 720p
CAT6 - 45m - 480p
CAT5e - 25m - 1080p
CAT5e - 35m - 1080i / 720p
CAT5e - 45m - 480p
You will need two network cables, and of course 2 HDMI cables, if you haven't got them already in order to make your connection too.
Will provide a 1080p HDMI signal at up to 30m when using CAT 6 Cable. See the following details for other resolutions available when using CAT 6 or CAT5e cables...:
CAT6 - 30m - 1080p
CAT6 - 40m - 1080i / 720p
CAT6 - 45m - 480p
CAT5e - 25m - 1080p
CAT5e - 35m - 1080i / 720p
CAT5e - 45m - 480p
Features of:
HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 30m / 98ft
You may also be interested in the following product(s)
|
HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 50m / 160ft
Price:
£ 46.90
Exc VAT:
£ 39.08
|
HDMI Splitter 2 Port
Price:
£ 32.98
Exc VAT:
£ 27.48
|
1-4 HDMI Distribution Amplifier Splitter HDCP Compliant 3D Ready
Price:
£ 59.89
Exc VAT:
£ 49.91
|
HDMI over Single Cat5 Cat6 Cat7 HD Extender Transmitter and Receiver 50m / 160ft
Price:
£ 79.98
Exc VAT:
£ 66.65
|
Specifications for:
HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 30m / 98ft
Package includes:
1 x Sender Unit, 1 x Receiver Unit, 1 x 5v DC Power Supply & User Manual
What else will you need?
You will need to order 2 Network Cables, male and 2 HDMI Cables, male in order to complete your solution. The 2 network cables will provide the connection between the transmitter and receiver and so choose the length you need. These will run alongside each other, in parallel. We have various lengths available, see related items for details.
You will need the HDMI Cables to connect your HD video player to the transmitter and the receiver to your HD display. We have various lengths available, see related items for details.
Questions & Answers on
HDMI over Cat5 Cat6 HD Extender Transmitter and Receiver 30m / 98ft
-
Q: I have just purchased a HDMI splitter to enable me to distribute Sky HD to two different screens. Having realised that the 6m HDMI cable will not fit through the wall that easily I discovered this product but I'm not sure if it works with the splitter. Can you please confirm if this product does work with a splitter? Can you also explain why it needs two network cables and should I get Cat5 or Cat6 cables? Thanks
- A: Hi,
Yes this will work with a HDMI splitter. In order to send the HDMI signal, 2 cables are needed to carry the high bandwidth of digital data that a HD signal produces. If you can, I would always go for a Cat 6, very little difference in overall cost to be honest! Thanks! See our Computer Cables > Network Cables dept for details...
Question asked by Justin at 19:23 on 15/02/2011 -
Q: Have just bought 3D Blueray. Need to know if you have an HDMI 1.4 transmitter receiver pair capable. Also switch box/ multiplexor.
Thank you- A: Hi,
While 1.4 cables have been around for a while, 1.4 version hardware is a bit slow off the mark. We are expecting to see 1.4 hardware during early next year arrive into stock with us. Nothing at present though! Thanks
Question asked by Mark at 21:29 on 10/12/2010 -
Q: I have a Ethernet Powerline 400mbps... so can I plug the transmitter into my router and the reciever into the Ethernet Powerline.. if I do that will it still be able to transmit video?? this way i dun have to have a wire running down my lounge... can I use the powerline?
- A: Hi,
These units will not work over a DLan / Ethernet over Power device. Sorry, but a seperate (dedicated) network cable is needed between the sender and receiver. Thanks for checking.
Question asked by Anirudha Kadam at 12:49 on 25/10/2010 -
Q: This product comes with 1 power supply. Is this required for the sender or receiver? CHEERS
- A: Hi, the power supply connects to the receiver. Hope this helps!
Question asked by Tone at 22:22 on 19/07/2010 -
Q: I have 2 rooms i need to put this product in? Am i correct by thinking if I have 2 of these i will only require 1 reciever (goes into the sky box / media player) and 2 transmitter or i only need to buy two of these and will only need to use either 1 reciever \ 1 transmitter without needing a splitter since the same signal will be sent?
need an answer quick so I can get buying- A: Hi,
Thanks for the question. In this kit you get 1 transmitter (that you could connect your SKY HD Box too) and one receiver (that you would connect your TV too in the other room). You cannot connect 2 transmitters to one reciever, by a splitter, switch or other means as the connection has to be point to point. If you have 2 HDMI devices you want to send the HD signal to on a TV in another room, then you will need a HDMI Switch, 'before' the transmitter. Then you can switch between the HD sources accordingly. As this would be in another room, we would suggest perhaps a HDMI switch with a remote control. You can then consider a seperate wireless IR, so you could then control the switch from the room with the TV in. (Just an idea!). Hope this helps!
Question asked by eamon at 00:36 on 11/06/2010 -
Q: does it also carry the sky or freesat remote signal to allow for channel changing.
- A: Hi, This will only carry the High Definition audio and video signal. Thanks for asking!
Question asked by ron thomas at 19:38 on 25/04/2010 -
Q: Does this carry sound as well as the video signal?
- A: Hi, yes it does. Many thanks for checking with us!
Question asked by Mike at 16:33 on 15/03/2010
About this Cables-Leads Product
Visit the Manufacturer Page: Cables-Leads
Manufacturers Part Number: 900300
Our Part Number: 900300
Item Condition: new
Manufacturers Part Number: 900300
Our Part Number: 900300
Item Condition: new
